Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 28.06.2025 08:45

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

What is lightning?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

[old diagram got deleted by accident]

Column: Having to replace high profile coaches is suddenly common for UVa - CavsCorner: Virginia Cavaliers Football & Basketball Recruiting

I post the exact comment here.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What are the best items to buy from a furniture shop?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

‘We tried and it didn’t work out’: CDPR co-founder says it shouldn’t stray from AAA open-world RPGs - Video Games Chronicle

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This Genetic ‘Trick’ Helped the Black Death Linger for Centuries - Gizmodo

One

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

My scammer is blackmailing me. If I don't pay 300 euros, he will send my intimate photos to my relatives. What should I do?

There are two important concepts here.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Top 1% Biotech, A Merck Rival, Plummets On A Surprise Failure - Investor's Business Daily

For this case there are devices called Metal oxide varistors (MOV).

The other is “what does a “fuse” do?”

but this device (an Inductor) … impedes the rapid changes in the current.

Is Elon Musk an actual genius, or is he surrounded by people smarter than him?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

At one ohm, the resistor has a maximum of 1 watt power.

Because the load is inductive, the current lags the voltage.(by a bit).

Top Federal Reserve official promises major overhaul of US bank regulation - Financial Times

what exactly is a ‘surge’ protector?

Upvotes:

These are simplified answers to the original question, and does not change anything I wrote above.

How to watch the 2025 Tony Awards - CNN

2024–10–16 [ OO OLAOYE OYEBODE ]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

What is your best and worst childhood memory? What was your biggest fear as a child?

nine

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

The bolt then partially travels down the line to your home.

R.I.P Loretta Swit: How well do you remember ''Hot Lips'' Houlihan? - MeTV

In schematic diagrams this is the symbol for a fuse:

It also is a device that limits the change in current flow.

The MOV will conduct when the voltage exceeds 50% of line voltage.

AI-Focused Apple Music Reboot Said to Be in the Works - MacRumors

A circuit breaker is similar, but is resettable.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Here is a simplified AC power diagram.

The third is lightning and “how it gets conducted into a home.”

So, the voltage could go up to 500 volts, and the fuse will not open up.

He then describes the function of a fuse.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

eight

An AC voltage/ current source, and an ac inductive load.

Edit 2024–10.

It seems Mohan does not understand the difference between a comment and an Answer.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

A fuse is a non-resetable over current circuit protector.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is where the MOV conducts again, and dissipated the energy.

There are three different concepts here that are getting confused.

But… the neutral is now “floating” because of the 1 ohm resistance.

This is 'the assistant's answer'

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is where this question deviates from being a 'generic' question, and becomes more specific.

He then describes Rainy Season and Lightning.

(Dc diagram shown, AC is similar).

Barnstars:

but I think this circuit , shows a few more pieces.

He then asserts :

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

At least they know the answer if they wanted it.

[image of Common-mode choke]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

But it can get overloaded, and no longer works.

This one hit behind the barn.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Now when you have a certain ac resistance, then a current flows in a loop.

the problem then depends on "how fast does the fuse operate?".

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

2024–10–10[John johnson John Johnson ]

These devices are installed between the “hot” and “neutral” and protective ground.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

so, what happens?

First Sentence:

This device then solves the entire problem.

2024–10–14 [Omar Gharbi Omar Gharbi ]

a photo is worth a thousand words.

What does a fuse do?

One is “what exactly is in a ‘surge protector’ ? ”